The TurboDrop Venturi or injector could be considered the ultimate spray nozzle accessory.
When used with conventional spray tips, the turbodrop venturi injects air into the spray droplets, expands the operating range, reduces drift, and improves on-target performance.
It also cuts the spray volume in half. For example, a size 06 twinfan tip would require a 03
venturi, which has half the flow rate.

Description: Medium or High Pressure TurboDrop® Venturi

All purpose, ceramic orifice Venturi body without exit tip and cap. Accepts conventional caps and tips (Turbo flat fan, twin fan, hollow cone, flood, off center, etc.).
Pattern tip must be double the size of the Venturi.
May require diffuser (DIF4) and cap.
20-120 psi TDXLV Overall pressure range
30-150 psi TDVC Overall pressure range

Polyacetal TDVC Venturi body with alumina ceramic metering orifice and EPDM seat gasket. TDVC has ceramic metering orific in Venturi body.

The Advantages: Medium or High Pressure TurboDrop® Venturi

The advantages would be the same as with the TurboDrop XL nozzles, with the added benefit of
being able to create a wide variety of spray patterns that are air injected.