High Pressure TurboDrop® NOZZLE:
• Optimal pressure range is 40-120 psi. Targeting 80 psi operating pressure will allow for greater changes in speed and pressure. Max pressure is 150 psi.

• Between 30 and 80 psi, the spray angle of the exit tip will narrow by approximately 10-15% (making a 110° degree tip essentially a 90-100° tip). Make necessary boom heighth adjustment for desired overlap. (For 20" spacing, a height of 24-40" is recommended.)

• Higher pressures (60-150psi) are recommended for penetration into a dense crop canopy and for better coverage with contact chemicals.



High Pressure TurboDrop® VENTURI:
• The venturi must be correctly matched to the exit tip. The venturi controls the flow rate; the exit tip determines the pattern only.

• Flat fan, flood, twin spray, hollowcone tips and others may be used with the venturi. Droplet size will vary with type of exit tip used. (Please consult Greenleaf Technologies.)

• Certain exit tips require the use of a diffuser (part#DIF4) and Greenleaf Cap.

• Always test any combination that you intend to use.